Call Us Today! +64 221539176
|matt@neptunes-gear.com

B&G Triton2 Autopilot Controller

Home/Electronics/Autopilots/B&G Triton2 Autopilot Controller

B&G Triton2 Autopilot Controller

NZD$433.91

Autopilot control designed specifically for sailors This intuitive autopilot controller keypad can be combined with a B&G Triton²  Display to create a fully-featured autopilot control head. B&G’s Intelligent Sail Steering functionality allows you to steer to a compass heading, or to automatically maintain a specified true or apparent wind angle in Wind mode. Smart Manoeuvre controls tack at the touch of a button, a perfect tool when sailing shorthanded. Connect to a compatible chartplotter, and Navigation mode will steer to your currently selected waypoint or route. A simple pushbutton interface makes the Triton²  Pilot easy to operate in rough conditions, and reliably responsive to wet or gloved hands. Dedicated auto and standby buttons enable or disable the autopilot with a single press, so it’s easy to free your hands from the wheel or instantly take control whenever you need to. The ‘mode’ button engages the pilot’s Wind or Navigation auto-steering modes, while dual port and starboard buttons allow course adjustments in one-degree or ten-degree increments. Smartly shaped buttons let you distinguish between these increments at a touch, for safe operation in low visibility. The Triton²  Pilot keypad is easily mounted, and offers single-cable NMEA 2000® connectivity for both power and data. Multiple keypads and Triton²  Displays can be installed to offer autopilot control from anywhere on board.

Categories: ,

Description

B&G Triton2 Autopilot Controller

The B&G Triton2 Autopilot controller is used in conjunction with a Triton 2 display to provide a fully featured AP control unit.

The controller then goes with either an NAC-2 or NAC-3 Core pack.

Required is a standard Triton2 display, which will be used to display Autopilot information when in Autopilot mode. Otherwise the display can be used to display any information (Wind, Boat speed, AIS etc) that is available on your NMEA2000 bus.

The Autopilot Controller has in intuitive keypad. Its simply connected by one NMEA2000 micro C connector, so installation could not be simpler.

This B&G Triton2 Autopilot Controller is not a complete autopilot. So you’ll need a Triton2 display, core pack and a drive unit to make it complete. See the options linked below. Which one you chose will depend on the size and weight of your boat. With vessels up to 10m choose the NAC-2 core pack. For vessels over 10m or heavy displacement, choose the NAC-3 core pack.

You will also need a drive unit. These can be hydraulic, electric, or solenoid based. Which one is suitable for your vessel will depend on the steering configuration and requirements. Please contact us if you are unsure.

NAC-3 Core Pack        B&G Triton2 Display

B&G Triton2 Pilot Controller – more info here

B&G Website

Additional information

Weight 0.3 kg

You may also like…

Title

Go to Top